DIY Depron Stealth F117

my 1st DIY depron stealth f117 with turnigy 2836 3200kv

I'm using turnigy plush 30 amp esc , 5x5e prop , hextronic 9g servos , rhino 3s 11.1v 2250mah 40c , futaba 10cap n futaba r617fs receiver ....it is pretty fast and reach approximate 150kph ....after a few flight the flap horn drop out and crashed it badly

after some time i decided to make a new one and it is abit more stable as the wing area is much more wider .....i swap all the power system to it and it flew prefectly and maiden was awesome :)

My old Align Trex 450 v2

this is my previous Align Trex 450 v2

1 year in flight experience...achieve few 3D manuever like side tick-tok , inverted all side position hover , rainbow , funnel & piro

now i am totally retired from heli and switch to RC plane pilot since after my left knee injured by Trex 600N ....sadly i was in a spectator side that time when one of my 3D pilot frenz crashed his Trex 600N onto my left knee ....my left knee broken into 4pcs (sorry dint take that heli pic) just wanted to share my sad experience in 3D heli pilot.

only this pic i had....my Align Trex 450 v2 :)

*and to everyone out there please be extra cautions when you are flying or you are on the flying field*

Corro Delta Wing & TWM Katana EP

After some times of flying the corro midwing Edge 540T i decide to change it to a delta wing in searching for speed...so i swap all the power system that was in the corro midwing edge 540T to my newly finished corro delta jet.......corro delta jet is way more simple and lighter compare with the midwing ....its flying weight include power system is around 830gram and the corro midwing was 1050gram.

maiden flight crash twice with hand launch because of wrong CG measured :) hehe ..even twice crash wouldn't be a problem with corro ...so the third time it was maidened successfully with a proper CG measured ....even with a low KV Turnigy SK Aerodrive 3536-1400kv with 8x6 prop my corro delta reach a top speed approximate 110kph

TWM Katana EP was a total failure because of the improper motor was fixed in it ....TWM Katana EP 40in wingspan and 36in in length ..weight about 700gram ....fixed motor Turnigy SK Aerodrive 3536-910kv with 12x6 prop .....the motor and big prop produce too much power torque to the Katana that make it twist ...so it crashed after few round of slow flight because i decide to punch it for low 3D....shit! it crashed with nose down

after the crash of Katana i was fedup and gave to one of my RC frenz :)

My 1st DIY corro midwing Edge 540T

my 1st DIY plane ...and it is made from corro and wooden spar that use to make mosquito net on your house window frame

Corro Edge 540T , wingspan - 40in , length - 37in :-

powered by Turnigy SK aerodrive 3536 1400kv , Tower Pro 40amp brushless esc , Turnigy 9g metal gear servos , Flightmax 2200mah 3S 11.1v lipo ....Futaba 10cap transmitter & Futuba R617FS 2.4G receiver

had been maiden it long time ago ...sorry ler no video was taken ..so cant share it here

1st attempt was crashed because I didn't really check the servos setting ...so the ailerons was reversed ....there is no problem on it even a 1 storey high crash...because it was made from corro and it is strong :) ... the 2nd attempt everythings works well YEAH

My Balsa Plane

Few days ago ...my rc friend just sold off his balsa plane to me that he is really fed up of flying ..so he sold it off ...and it also came together with his motor (GT 2215/10)

after retiring my souka so I decide to take it ....seems it use a similar power system ...so i swap all the 4 servos to the fire dragon

now the fire dragon is power by ... GT motor 2215/10 , prop : 9x6 , tower pro esc 40amp , hextronic 9g servos , futabe 7channel receiver and ofcoz with my futuba 10cap transmitter ....battery : 3s 11.1v rhino lipo

with the power system installed , yesterday it was maidened ...and it is awesome

thankz to sim :)

Hello there ... I am NEW !!! yeah haha

here I am ..do blogging like everyone else did..so i am here giving a try and see how it works ..haha

Hello there, I am David Teh from Selangor, Malaysia ..living in a small town named Klang. I am currently working in Puchong as an estimator in a automotive workshop.

Yeah ...it seems great huh ?? haha that a try lar (testing)

So most of the things I will be sharing is my hobby ler... remote control (RC) planes :)
RC planes and DIY RC planes.

currently DIY-ing 2 plane ...will be update agian once every things ready

Cheerz